Allow Us to Choose Where Labels are printed on 4x5 labels

1

When printing labels for the 4x5 option, they are always printed on the top left corner. This creates an issue where the label sheet has leftover labels that are hard to use. I would like to request a feature where you can choose which corner you would like to start printing labels on (top left, top right, bottom left, or bottom right).

Thanks!

0

Hi Nick,

It sounds like you want a feature where you can choose different quadrants of the paper. For instance, the top left quadrant, bottom right, etc. Is that correct?

Comment actions Permalink
0

Hi Rachel, yes that is correct! We often have partially printed sheets with only 1 or two labels left. We've worked around this by flipping the paper around, but it would be nice to not have to worry about that. Thanks!

Comment actions Permalink
0

Nick,

Thanks for that clarification - I will be sure to forward your request!

Happy Shipping!

Comment actions Permalink
0

I'm for the same option - two of the corners can currently be used by rotating the paper, but the other two are wasted.

Comment actions Permalink
0

Hello John, 
Thank you for your post- I've updated our documents to include your request.

Madilynn T. [ShippingEasy Product] 

Comment actions Permalink
0

How will we know when this feature is available? I would love to be able to choose which quadrant to print a label on.

Comment actions Permalink
0

Hello,

We will update this feature post here so it's easy to track!

Madilynn T. [ShippingEasy Product] 

Comment actions Permalink
0

Any update on this issue?  I would like to stay with Shipping Easy but I have dozens and dozens of half used label sheets because of this issue, and I'll have to switch soon to another provider.

Comment actions Permalink
0

Hello Jordan,

Once we do have any updates, we will be sure to share them here! We don't any updates on this feature currently, it is still under consideration for prioritization. 

Madilynn T. [ShippingEasy Product]

Comment actions Permalink
0

Printing labels - being able to choose label position

 

I use label sheets that print 4 labels to a sheet.  But if I just have 1 label to print (or any number less than 4) it leaves a partial sheet unused.  I end up wasting a lot of labels because when I go to print a single shipping label it always prints in the 1st position (upper left).

 

It would be great to be able to choose the print position for labels when you are printing less than a full sheet.  That would cut down on waste tremendously and save us money.

Comment actions Permalink
0

I am searching for a new shipping provider now because of this unresolved issue.  Too much waste and cost with our unused labels.  It's been an issue now for two years so i don't expect Shipping Easy to resolve it anytime soon.  

Comment actions Permalink
0

I was just writing a suggestion for this, and this thread was suggested to me. Here's to hoping this gets added. 

Comment actions Permalink
0

Hi Nicholas,

Thank you for reaching out! At this time, we don't have a specific release date for this feature but it is on our team's list to consider for prioritization. I've gone ahead and logged your support of this as well. 

If we hear this feature mentioned by any customers, we will ask them to comment to show their support as well! 

Thanks!

Comment actions Permalink

Add a Comment

Please sign in to leave a comment.